Standard Split System Air Conditioner Installation
Standard single storey back-to-back installation:
o Installation of air conditioner by a Licensed Installers
o Installation of a split system air conditioner unit
o Compliance certificate (mandatory in VIC and ACT)
o Up to 2.5 metres of pipework connecting the indoor head unit and outdoor compressor unit
o Up to 20 metres of internal roof cable run and connecting to an existing and available circuit. Please check switchboard for capacity and availability. Does NOT include additional electrical work, such as adding a new circuit.
o PVC ducting to conceal pipework and electrical connections
o RCD and Weatherproof safety isolation switch mounted near outdoor unit
How it works:
o After receiving your order, we will contact you and arrange for installation on a date that suits you
o Installer will come to you to set up the unit
Additional charges may apply, including, but not limited to, double storey installations and non back-to-back installations. Additional charges/extras are based on individual installation requirements. Any extras that are not pre-purchased but are required will be payable to the installer on the day. In the event of any extras being required the installer will explain the reasons prior to proceeding with installation.
IMPORTANT: Internal unit requires 150mm set back from roof and walls, and a 2300mm set back from ground.
Aircon Additional Charges:
Price listed is for Single Storey properties in metro areas and for units installed back-to-back.
Additional Charges Apply for:
• Double storey properties
• Regional locations
• Non back-to-back installations
The most common extras and their standard pricing are noted below, however please be aware that other costs may be incurred based on your individual installation requirements. Not all extras can be pre-purchased, as the installing electrician must attend site before the exact requirements can be determined. These will be completed on the day by the installer. In this case, the installer will explain the reasons for the requirement/s before proceeding.
All additional costs are based on individual requirements. Prices include GST:
o De-Gas & Remove old unit - $110
o Polysab - $49.50
o PVC Feet Outdoor Units (4 feet) - $44
o Wall Brackets Fitted Up to 5kW - $89
o Wall Brackets Fitted Over to 5kW - $99
o Roof Bracket Mounted - $250
o Pipe Per Meter ( Pipework, Ducted, Electrical) - $50
o Drain Pipe In Ducting - $35
o Drain Pipe - $3
o Drain Pipe Right Angle Bends - $6.50
o 90 Degree Bend Internal - $16.50
o 90 Degree Bend External - $16.50
o Side Entry Pipe Work - $120
o Extra Labour Charge Per Hour In Consultation with Customer - $92.40
o Double Storey - $110